# NAME List::AllUtils - Combines List::Util, List::SomeUtils and List::UtilsBy in one bite-sized package # VERSION version 0.15 # SYNOPSIS use List::AllUtils qw( first any ); # _Everything_ from List::Util, List::SomeUtils, and List::UtilsBy use List::AllUtils qw( :all ); my @numbers = ( 1, 2, 3, 5, 7 ); # or don't import anything return List::AllUtils::first { $_ > 5 } @numbers; # DESCRIPTION Are you sick of trying to remember whether a particular helper is defined in [List::Util](https://metacpan.org/pod/List::Util), [List::SomeUtils](https://metacpan.org/pod/List::SomeUtils) or [List::UtilsBy](https://metacpan.org/pod/List::UtilsBy)? I sure am. Now you don't have to remember. This module will export all of the functions that either of those three modules defines. Note that all function documentation has been shamelessly copied from [List::Util](https://metacpan.org/pod/List::Util), [List::SomeUtils](https://metacpan.org/pod/List::SomeUtils) and [List::UtilsBy](https://metacpan.org/pod/List::UtilsBy). ## Which One Wins? Recently, [List::Util](https://metacpan.org/pod/List::Util) has started including some of the subs that used to only be in [List::SomeUtils](https://metacpan.org/pod/List::SomeUtils). Similar, [List::SomeUtils](https://metacpan.org/pod/List::SomeUtils) has some small overlap with [List::UtilsBy](https://metacpan.org/pod/List::UtilsBy). `List::AllUtils` always favors the version provided by [List::Util](https://metacpan.org/pod/List::Util), [List::SomeUtils](https://metacpan.org/pod/List::SomeUtils) or [List::UtilsBy](https://metacpan.org/pod/List::UtilsBy) in that order. The docs below come from [List::Util](https://metacpan.org/pod/List::Util) 1.31, [List::SomeUtils](https://metacpan.org/pod/List::SomeUtils) 0.50, and [List::UtilsBy](https://metacpan.org/pod/List::UtilsBy) 0.10. # WHAT IS EXPORTED? All this module does is load [List::Util](https://metacpan.org/pod/List::Util), [List::SomeUtils](https://metacpan.org/pod/List::SomeUtils), and [List::UtilsBy](https://metacpan.org/pod/List::UtilsBy), and then re-export everything that they provide. That means that regardless of the documentation below, you will get any subroutine that your installed version provides. # LIST-REDUCTION FUNCTIONS The following set of functions all reduce a list down to a single value. ## reduce BLOCK LIST Reduces LIST by calling BLOCK, in a scalar context, multiple times, setting `$a` and `$b` each time. The first call will be with `$a` and `$b` set to the first two elements of the list, subsequent calls will be done by setting `$a` to the result of the previous call and `$b` to the next element in the list. Returns the result of the last call to BLOCK. If LIST is empty then `undef` is returned. If LIST only contains one element then that element is returned and BLOCK is not executed. $foo = reduce { $a < $b ? $a : $b } 1..10 # min $foo = reduce { $a lt $b ? $a : $b } 'aa'..'zz' # minstr $foo = reduce { $a + $b } 1 .. 10 # sum $foo = reduce { $a . $b } @bar # concat If your algorithm requires that `reduce` produce an identity value, then make sure that you always pass that identity value as the first argument to prevent `undef` being returned $foo = reduce { $a + $b } 0, @values; # sum with 0 identity value The remaining list-reduction functions are all specialisations of this generic idea. ## first BLOCK LIST Similar to `grep` in that it evaluates BLOCK setting `$_` to each element of LIST in turn. `first` returns the first element where the result from BLOCK is a true value. If BLOCK never returns true or LIST was empty then `undef` is returned. $foo = first { defined($_) } @list # first defined value in @list $foo = first { $_ > $value } @list # first value in @list which # is greater than $value This function could be implemented using `reduce` like this $foo = reduce { defined($a) ? $a : wanted($b) ? $b : undef } undef, @list for example wanted() could be defined() which would return the first defined value in @list ## max LIST Returns the entry in the list with the highest numerical value. If the list is empty then `undef` is returned. $foo = max 1..10 # 10 $foo = max 3,9,12 # 12 $foo = max @bar, @baz # whatever This function could be implemented using `reduce` like this $foo = reduce { $a > $b ? $a : $b } 1..10 ## maxstr LIST Similar to `max`, but treats all the entries in the list as strings and returns the highest string as defined by the `gt` operator. If the list is empty then `undef` is returned. $foo = maxstr 'A'..'Z' # 'Z' $foo = maxstr "hello","world" # "world" $foo = maxstr @bar, @baz # whatever This function could be implemented using `reduce` like this $foo = reduce { $a gt $b ? $a : $b } 'A'..'Z' ## min LIST Similar to `max` but returns the entry in the list with the lowest numerical value. If the list is empty then `undef` is returned. $foo = min 1..10 # 1 $foo = min 3,9,12 # 3 $foo = min @bar, @baz # whatever This function could be implemented using `reduce` like this $foo = reduce { $a < $b ? $a : $b } 1..10 ## minstr LIST Similar to `min`, but treats all the entries in the list as strings and returns the lowest string as defined by the `lt` operator. If the list is empty then `undef` is returned. $foo = minstr 'A'..'Z' # 'A' $foo = minstr "hello","world" # "hello" $foo = minstr @bar, @baz # whatever This function could be implemented using `reduce` like this $foo = reduce { $a lt $b ? $a : $b } 'A'..'Z' ## sum LIST Returns the sum of all the elements in LIST. If LIST is empty then `undef` is returned. $foo = sum 1..10 # 55 $foo = sum 3,9,12 # 24 $foo = sum @bar, @baz # whatever This function could be implemented using `reduce` like this $foo = reduce { $a + $b } 1..10 ## sum0 LIST Similar to `sum`, except this returns 0 when given an empty list, rather than `undef`. # KEY/VALUE PAIR LIST FUNCTIONS The following set of functions, all inspired by [List::Pairwise](https://metacpan.org/pod/List::Pairwise), consume an even-sized list of pairs. The pairs may be key/value associations from a hash, or just a list of values. The functions will all preserve the original ordering of the pairs, and will not be confused by multiple pairs having the same "key" value - nor even do they require that the first of each pair be a plain string. ## pairgrep BLOCK KVLIST Similar to perl's `grep` keyword, but interprets the given list as an even-sized list of pairs. It invokes the BLOCK multiple times, in scalar context, with `$a` and `$b` set to successive pairs of values from the KVLIST. Returns an even-sized list of those pairs for which the BLOCK returned true in list context, or the count of the **number of pairs** in scalar context. (Note, therefore, in scalar context that it returns a number half the size of the count of items it would have returned in list context). @subset = pairgrep { $a =~ m/^[[:upper:]]+$/ } @kvlist Similar to `grep`, `pairgrep` aliases `$a` and `$b` to elements of the given list. Any modifications of it by the code block will be visible to the caller. ## pairfirst BLOCK KVLIST Similar to the `first` function, but interprets the given list as an even-sized list of pairs. It invokes the BLOCK multiple times, in scalar context, with `$a` and `$b` set to successive pairs of values from the KVLIST. Returns the first pair of values from the list for which the BLOCK returned true in list context, or an empty list of no such pair was found. In scalar context it returns a simple boolean value, rather than either the key or the value found. ( $key, $value ) = pairfirst { $a =~ m/^[[:upper:]]+$/ } @kvlist Similar to `grep`, `pairfirst` aliases `$a` and `$b` to elements of the given list. Any modifications of it by the code block will be visible to the caller. ## pairmap BLOCK KVLIST Similar to perl's `map` keyword, but interprets the given list as an even-sized list of pairs. It invokes the BLOCK multiple times, in list context, with `$a` and `$b` set to successive pairs of values from the KVLIST. Returns the concatenation of all the values returned by the BLOCK in list context, or the count of the number of items that would have been returned in scalar context. @result = pairmap { "The key $a has value $b" } @kvlist Similar to `map`, `pairmap` aliases `$a` and `$b` to elements of the given list. Any modifications of it by the code block will be visible to the caller. ## pairs KVLIST A convenient shortcut to operating on even-sized lists of pairs, this function returns a list of ARRAY references, each containing two items from the given list. It is a more efficient version of pairmap { [ $a, $b ] } KVLIST It is most convenient to use in a `foreach` loop, for example: foreach ( pairs @KVLIST ) { my ( $key, $value ) = @$_; ... } ## pairkeys KVLIST A convenient shortcut to operating on even-sized lists of pairs, this function returns a list of the the first values of each of the pairs in the given list. It is a more efficient version of pairmap { $a } KVLIST ## pairvalues KVLIST A convenient shortcut to operating on even-sized lists of pairs, this function returns a list of the the second values of each of the pairs in the given list. It is a more efficient version of pairmap { $b } KVLIST # OTHER FUNCTIONS ## shuffle LIST Returns the elements of LIST in a random order @cards = shuffle 0..51 # 0..51 in a random order # List::SomeUtils FUNCTIONS ## Junctions ### _Treatment of an empty list_ There are two schools of thought for how to evaluate a junction on an empty list: - Reduction to an identity (boolean) - Result is undefined (three-valued) In the first case, the result of the junction applied to the empty list is determined by a mathematical reduction to an identity depending on whether the underlying comparison is "or" or "and". Conceptually: "any are true" "all are true" -------------- -------------- 2 elements: A || B || 0 A && B && 1 1 element: A || 0 A && 1 0 elements: 0 1 In the second case, three-value logic is desired, in which a junction applied to an empty list returns `undef` rather than true or false Junctions with a `_u` suffix implement three-valued logic. Those without are boolean. ### all BLOCK LIST ### all\_u BLOCK LIST Returns a true value if all items in LIST meet the criterion given through BLOCK. Sets `$_` for each item in LIST in turn: print "All values are non-negative" if all { $_ >= 0 } ($x, $y, $z); For an empty LIST, `all` returns true (i.e. no values failed the condition) and `all_u` returns `undef`. Thus, `all_u(@list)` is equivalent to `@list ? all(@list) : undef`. **Note**: because Perl treats `undef` as false, you must check the return value of `all_u` with `defined` or you will get the opposite result of what you expect. ### any BLOCK LIST ### any\_u BLOCK LIST Returns a true value if any item in LIST meets the criterion given through BLOCK. Sets `$_` for each item in LIST in turn: print "At least one non-negative value" if any { $_ >= 0 } ($x, $y, $z); For an empty LIST, `any` returns false and `any_u` returns `undef`. Thus, `any_u(@list)` is equivalent to `@list ? any(@list) : undef`. ### none BLOCK LIST ### none\_u BLOCK LIST Logically the negation of `any`. Returns a true value if no item in LIST meets the criterion given through BLOCK. Sets `$_` for each item in LIST in turn: print "No non-negative values" if none { $_ >= 0 } ($x, $y, $z); For an empty LIST, `none` returns true (i.e. no values failed the condition) and `none_u` returns `undef`. Thus, `none_u(@list)` is equivalent to `@list ? none(@list) : undef`. **Note**: because Perl treats `undef` as false, you must check the return value of `none_u` with `defined` or you will get the opposite result of what you expect. ### notall BLOCK LIST ### notall\_u BLOCK LIST Logically the negation of `all`. Returns a true value if not all items in LIST meet the criterion given through BLOCK. Sets `$_` for each item in LIST in turn: print "Not all values are non-negative" if notall { $_ >= 0 } ($x, $y, $z); For an empty LIST, `notall` returns false and `notall_u` returns `undef`. Thus, `notall_u(@list)` is equivalent to `@list ? notall(@list) : undef`. ### one BLOCK LIST ### one\_u BLOCK LIST Returns a true value if precisely one item in LIST meets the criterion given through BLOCK. Sets `$_` for each item in LIST in turn: print "Precisely one value defined" if one { defined($_) } @list; Returns false otherwise. For an empty LIST, `one` returns false and `one_u` returns `undef`. The expression `one BLOCK LIST` is almost equivalent to `1 == true BLOCK LIST`, except for short-cutting. Evaluation of BLOCK will immediately stop at the second true value. ## Transformation ### apply BLOCK LIST Applies BLOCK to each item in LIST and returns a list of the values after BLOCK has been applied. In scalar context, the last element is returned. This function is similar to `map` but will not modify the elements of the input list: my @list = (1 .. 4); my @mult = apply { $_ *= 2 } @list; print "\@list = @list\n"; print "\@mult = @mult\n"; __END__ @list = 1 2 3 4 @mult = 2 4 6 8 Think of it as syntactic sugar for for (my @mult = @list) { $_ *= 2 } ### insert\_after BLOCK VALUE LIST Inserts VALUE after the first item in LIST for which the criterion in BLOCK is true. Sets `$_` for each item in LIST in turn. my @list = qw/This is a list/; insert_after { $_ eq "a" } "longer" => @list; print "@list"; __END__ This is a longer list ### insert\_after\_string STRING VALUE LIST Inserts VALUE after the first item in LIST which is equal to STRING. my @list = qw/This is a list/; insert_after_string "a", "longer" => @list; print "@list"; __END__ This is a longer list ### pairwise BLOCK ARRAY1 ARRAY2 Evaluates BLOCK for each pair of elements in ARRAY1 and ARRAY2 and returns a new list consisting of BLOCK's return values. The two elements are set to `$a` and `$b`. Note that those two are aliases to the original value so changing them will modify the input arrays. @a = (1 .. 5); @b = (11 .. 15); @x = pairwise { $a + $b } @a, @b; # returns 12, 14, 16, 18, 20 # mesh with pairwise @a = qw/a b c/; @b = qw/1 2 3/; @x = pairwise { ($a, $b) } @a, @b; # returns a, 1, b, 2, c, 3 ### mesh ARRAY1 ARRAY2 \[ ARRAY3 ... \] ### zip ARRAY1 ARRAY2 \[ ARRAY3 ... \] Returns a list consisting of the first elements of each array, then the second, then the third, etc, until all arrays are exhausted. Examples: @x = qw/a b c d/; @y = qw/1 2 3 4/; @z = mesh @x, @y; # returns a, 1, b, 2, c, 3, d, 4 @a = ('x'); @b = ('1', '2'); @c = qw/zip zap zot/; @d = mesh @a, @b, @c; # x, 1, zip, undef, 2, zap, undef, undef, zot `zip` is an alias for `mesh`. ### uniq LIST ### distinct LIST Returns a new list by stripping duplicate values in LIST by comparing the values as hash keys, except that undef is considered separate from ''. The order of elements in the returned list is the same as in LIST. In scalar context, returns the number of unique elements in LIST. my @x = uniq 1, 1, 2, 2, 3, 5, 3, 4; # returns 1 2 3 5 4 my $x = uniq 1, 1, 2, 2, 3, 5, 3, 4; # returns 5 # returns "Mike", "Michael", "Richard", "Rick" my @n = distinct "Mike", "Michael", "Richard", "Rick", "Michael", "Rick" # returns '', undef, 'S1', A5' my @s = distinct '', undef, 'S1', 'A5' # returns '', undef, 'S1', A5' my @w = uniq undef, '', 'S1', 'A5' `distinct` is an alias for `uniq`. **RT#49800** can be used to give feedback about this behavior. ### singleton Returns a new list by stripping values in LIST occurring more than once by comparing the values as hash keys, except that undef is considered separate from ''. The order of elements in the returned list is the same as in LIST. In scalar context, returns the number of elements occurring only once in LIST. my @x = singleton 1,1,2,2,3,4,5 # returns 3 4 5 ## Partitioning ### after BLOCK LIST Returns a list of the values of LIST after (and not including) the point where BLOCK returns a true value. Sets `$_` for each element in LIST in turn. @x = after { $_ % 5 == 0 } (1..9); # returns 6, 7, 8, 9 ### after\_incl BLOCK LIST Same as `after` but also includes the element for which BLOCK is true. ### before BLOCK LIST Returns a list of values of LIST up to (and not including) the point where BLOCK returns a true value. Sets `$_` for each element in LIST in turn. ### before\_incl BLOCK LIST Same as `before` but also includes the element for which BLOCK is true. ### part BLOCK LIST Partitions LIST based on the return value of BLOCK which denotes into which partition the current value is put. Returns a list of the partitions thusly created. Each partition created is a reference to an array. my $i = 0; my @part = part { $i++ % 2 } 1 .. 8; # returns [1, 3, 5, 7], [2, 4, 6, 8] You can have a sparse list of partitions as well where non-set partitions will be undef: my @part = part { 2 } 1 .. 10; # returns undef, undef, [ 1 .. 10 ] Be careful with negative values, though: my @part = part { -1 } 1 .. 10; __END__ Modification of non-creatable array value attempted, subscript -1 ... Negative values are only ok when they refer to a partition previously created: my @idx = ( 0, 1, -1 ); my $i = 0; my @part = part { $idx[$++ % 3] } 1 .. 8; # [1, 4, 7], [2, 3, 5, 6, 8] ## Iteration ### each\_array ARRAY1 ARRAY2 ... Creates an array iterator to return the elements of the list of arrays ARRAY1, ARRAY2 throughout ARRAYn in turn. That is, the first time it is called, it returns the first element of each array. The next time, it returns the second elements. And so on, until all elements are exhausted. This is useful for looping over more than one array at once: my $ea = each_array(@a, @b, @c); while ( my ($a, $b, $c) = $ea->() ) { .... } The iterator returns the empty list when it reached the end of all arrays. If the iterator is passed an argument of '`index`', then it returns the index of the last fetched set of values, as a scalar. ### each\_arrayref LIST Like each\_array, but the arguments are references to arrays, not the plain arrays. ### natatime EXPR, LIST Creates an array iterator, for looping over an array in chunks of `$n` items at a time. (n at a time, get it?). An example is probably a better explanation than I could give in words. Example: my @x = ('a' .. 'g'); my $it = natatime 3, @x; while (my @vals = $it->()) { print "@vals\n"; } This prints a b c d e f g ## Searching ### bsearch BLOCK LIST Performs a binary search on LIST which must be a sorted list of values. BLOCK must return a negative value if the current element (stored in `$_`) is smaller, a positive value if it is bigger and zero if it matches. Returns a boolean value in scalar context. In list context, it returns the element if it was found, otherwise the empty list. ### bsearchidx BLOCK LIST ### bsearch\_index BLOCK LIST Performs a binary search on LIST which must be a sorted list of values. BLOCK must return a negative value if the current element (stored in `$_`) is smaller, a positive value if it is bigger and zero if it matches. Returns the index of found element, otherwise `-1`. `bsearch_index` is an alias for `bsearchidx`. ### firstval BLOCK LIST ### first\_value BLOCK LIST Returns the first element in LIST for which BLOCK evaluates to true. Each element of LIST is set to `$_` in turn. Returns `undef` if no such element has been found. `first_value` is an alias for `firstval`. ### onlyval BLOCK LIST ### only\_value BLOCK LIST Returns the only element in LIST for which BLOCK evaluates to true. Sets `$_` for each item in LIST in turn. Returns `undef` if no such element has been found. `only_value` is an alias for `onlyval`. ### lastval BLOCK LIST ### last\_value BLOCK LIST Returns the last value in LIST for which BLOCK evaluates to true. Each element of LIST is set to `$_` in turn. Returns `undef` if no such element has been found. `last_value` is an alias for `lastval`. ### firstres BLOCK LIST ### first\_result BLOCK LIST Returns the result of BLOCK for the first element in LIST for which BLOCK evaluates to true. Each element of LIST is set to `$_` in turn. Returns `undef` if no such element has been found. `first_result` is an alias for `firstres`. ### onlyres BLOCK LIST ### only\_result BLOCK LIST Returns the result of BLOCK for the first element in LIST for which BLOCK evaluates to true. Sets `$_` for each item in LIST in turn. Returns `undef` if no such element has been found. `only_result` is an alias for `onlyres`. ### lastres BLOCK LIST ### last\_result BLOCK LIST Returns the result of BLOCK for the last element in LIST for which BLOCK evaluates to true. Each element of LIST is set to `$_` in turn. Returns `undef` if no such element has been found. `last_result` is an alias for `lastres`. ### indexes BLOCK LIST Evaluates BLOCK for each element in LIST (assigned to `$_`) and returns a list of the indices of those elements for which BLOCK returned a true value. This is just like `grep` only that it returns indices instead of values: @x = indexes { $_ % 2 == 0 } (1..10); # returns 1, 3, 5, 7, 9 ### firstidx BLOCK LIST ### first\_index BLOCK LIST Returns the index of the first element in LIST for which the criterion in BLOCK is true. Sets `$_` for each item in LIST in turn: my @list = (1, 4, 3, 2, 4, 6); printf "item with index %i in list is 4", firstidx { $_ == 4 } @list; __END__ item with index 1 in list is 4 Returns `-1` if no such item could be found. `first_index` is an alias for `firstidx`. ### onlyidx BLOCK LIST ### only\_index BLOCK LIST Returns the index of the only element in LIST for which the criterion in BLOCK is true. Sets `$_` for each item in LIST in turn: my @list = (1, 3, 4, 3, 2, 4); printf "uniqe index of item 2 in list is %i", onlyidx { $_ == 2 } @list; __END__ unique index of item 2 in list is 4 Returns `-1` if either no such item or more than one of these has been found. `only_index` is an alias for `onlyidx`. ### lastidx BLOCK LIST ### last\_index BLOCK LIST Returns the index of the last element in LIST for which the criterion in BLOCK is true. Sets `$_` for each item in LIST in turn: my @list = (1, 4, 3, 2, 4, 6); printf "item with index %i in list is 4", lastidx { $_ == 4 } @list; __END__ item with index 4 in list is 4 Returns `-1` if no such item could be found. `last_index` is an alias for `lastidx`. ## Sorting ### sort\_by BLOCK LIST Returns the list of values sorted according to the string values returned by the KEYFUNC block or function. A typical use of this may be to sort objects according to the string value of some accessor, such as sort_by { $_->name } @people The key function is called in scalar context, being passed each value in turn as both $\_ and the only argument in the parameters, @\_. The values are then sorted according to string comparisons on the values returned. This is equivalent to sort { $a->name cmp $b->name } @people except that it guarantees the name accessor will be executed only once per value. One interesting use-case is to sort strings which may have numbers embedded in them "naturally", rather than lexically. sort_by { s/(\d+)/sprintf "%09d", $1/eg; $_ } @strings This sorts strings by generating sort keys which zero-pad the embedded numbers to some level (9 digits in this case), helping to ensure the lexical sort puts them in the correct order. ### nsort\_by BLOCK LIST Similar to sort\_by but compares its key values numerically. ## Counting and calculation ### true BLOCK LIST Counts the number of elements in LIST for which the criterion in BLOCK is true. Sets `$_` for each item in LIST in turn: printf "%i item(s) are defined", true { defined($_) } @list; ### false BLOCK LIST Counts the number of elements in LIST for which the criterion in BLOCK is false. Sets `$_` for each item in LIST in turn: printf "%i item(s) are not defined", false { defined($_) } @list; ### minmax LIST Calculates the minimum and maximum of LIST and returns a two element list with the first element being the minimum and the second the maximum. Returns the empty list if LIST was empty. The `minmax` algorithm differs from a naive iteration over the list where each element is compared to two values being the so far calculated min and max value in that it only requires 3n/2 - 2 comparisons. Thus it is the most efficient possible algorithm. However, the Perl implementation of it has some overhead simply due to the fact that there are more lines of Perl code involved. Therefore, LIST needs to be fairly big in order for `minmax` to win over a naive implementation. This limitation does not apply to the XS version. ### mode LIST Calculates the most common items in the list and returns them as a list. This is effectively done by string comparisons, so references will be stringified. If they implement string overloading, this will be used. If more than one item appears the same number of times in the list, all such items will be returned. For example, the mode of a unique list is the list itself. This function **always** returns a list. That means that in scalar context you get a count indicating the number of modes in the list. # List::UtilsBy Functions ## rev\_sort\_by ## rev\_nsort\_by @vals = rev_sort_by { KEYFUNC } @vals @vals = rev_nsort_by { KEYFUNC } @vals _Since version 0.06._ Similar to ["sort\_by"](#sort_by) and ["nsort\_by"](#nsort_by) but returns the list in the reverse order. Equivalent to @vals = reverse sort_by { KEYFUNC } @vals except that these functions are slightly more efficient because they avoid the final `reverse` operation. ## max\_by $optimal = max_by { KEYFUNC } @vals @optimal = max_by { KEYFUNC } @vals Returns the (first) value from `@vals` that gives the numerically largest result from the key function. my $tallest = max_by { $_->height } @people use File::stat qw( stat ); my $newest = max_by { stat($_)->mtime } @files; In scalar context, the first maximal value is returned. In list context, a list of all the maximal values is returned. This may be used to obtain positions other than the first, if order is significant. If called on an empty list, an empty list is returned. For symmetry with the ["nsort\_by"](#nsort_by) function, this is also provided under the name `nmax_by` since it behaves numerically. ## min\_by $optimal = min_by { KEYFUNC } @vals @optimal = min_by { KEYFUNC } @vals Similar to ["max\_by"](#max_by) but returns values which give the numerically smallest result from the key function. Also provided as `nmin_by` ## minmax\_by ( $minimal, $maximal ) = minmax_by { KEYFUNC } @vals Similar to calling both ["min\_by"](#min_by) and ["max\_by"](#max_by) with the same key function on the same list. This version is more efficient than calling the two other functions individually, as it has less work to perform overall. In the case of ties, only the first optimal element found in each case is returned. Also provided as `nminmax_by`. ## uniq\_by @vals = uniq_by { KEYFUNC } @vals Returns a list of the subset of values for which the key function block returns unique values. The first value yielding a particular key is chosen, subsequent values are rejected. my @some_fruit = uniq_by { $_->colour } @fruit; To select instead the last value per key, reverse the input list. If the order of the results is significant, don't forget to reverse the result as well: my @some_fruit = reverse uniq_by { $_->colour } reverse @fruit; Because the values returned by the key function are used as hash keys, they ought to either be strings, or at least well-behaved as strings (such as numbers, or object references which overload stringification in a suitable manner). ## partition\_by %parts = partition_by { KEYFUNC } @vals Returns a key/value list of ARRAY refs containing all the original values distributed according to the result of the key function block. Each value will be an ARRAY ref containing all the values which returned the string from the key function, in their original order. my %balls_by_colour = partition_by { $_->colour } @balls; Because the values returned by the key function are used as hash keys, they ought to either be strings, or at least well-behaved as strings (such as numbers, or object references which overload stringification in a suitable manner). ## count\_by %counts = count_by { KEYFUNC } @vals Returns a key/value list of integers, giving the number of times the key function block returned the key, for each value in the list. my %count_of_balls = count_by { $_->colour } @balls; Because the values returned by the key function are used as hash keys, they ought to either be strings, or at least well-behaved as strings (such as numbers, or object references which overload stringification in a suitable manner). ## zip\_by @vals = zip_by { ITEMFUNC } \@arr0, \@arr1, \@arr2,... Returns a list of each of the values returned by the function block, when invoked with values from across each each of the given ARRAY references. Each value in the returned list will be the result of the function having been invoked with arguments at that position, from across each of the arrays given. my @transposition = zip_by { [ @_ ] } @matrix; my @names = zip_by { "$_[1], $_[0]" } \@firstnames, \@surnames; print zip_by { "$_[0] => $_[1]\n" } [ keys %hash ], [ values %hash ]; If some of the arrays are shorter than others, the function will behave as if they had `undef` in the trailing positions. The following two lines are equivalent: zip_by { f(@_) } [ 1, 2, 3 ], [ "a", "b" ] f( 1, "a" ), f( 2, "b" ), f( 3, undef ) The item function is called by `map`, so if it returns a list, the entire list is included in the result. This can be useful for example, for generating a hash from two separate lists of keys and values my %nums = zip_by { @_ } [qw( one two three )], [ 1, 2, 3 ]; # %nums = ( one => 1, two => 2, three => 3 ) (A function having this behaviour is sometimes called `zipWith`, e.g. in Haskell, but that name would not fit the naming scheme used by this module). ## unzip\_by $arr0, $arr1, $arr2, ... = unzip_by { ITEMFUNC } @vals Returns a list of ARRAY references containing the values returned by the function block, when invoked for each of the values given in the input list. Each of the returned ARRAY references will contain the values returned at that corresponding position by the function block. That is, the first returned ARRAY reference will contain all the values returned in the first position by the function block, the second will contain all the values from the second position, and so on. my ( $firstnames, $lastnames ) = unzip_by { m/^(.*?) (.*)$/ } @names; If the function returns lists of differing lengths, the result will be padded with `undef` in the missing elements. This function is an inverse of ["zip\_by"](#zip_by), if given a corresponding inverse function. ## extract\_by @vals = extract_by { SELECTFUNC } @arr Removes elements from the referenced array on which the selection function returns true, and returns a list containing those elements. This function is similar to `grep`, except that it modifies the referenced array to remove the selected values from it, leaving only the unselected ones. my @red_balls = extract_by { $_->color eq "red" } @balls; # Now there are no red balls in the @balls array This function modifies a real array, unlike most of the other functions in this module. Because of this, it requires a real array, not just a list. This function is implemented by invoking `splice` on the array, not by constructing a new list and assigning it. One result of this is that weak references will not be disturbed. extract_by { !defined $_ } @refs; will leave weak references weakened in the `@refs` array, whereas @refs = grep { defined $_ } @refs; will strengthen them all again. ## extract\_first\_by $val = extract_first_by { SELECTFUNC } @arr A hybrid between ["extract\_by"](#extract_by) and `List::Util::first`. Removes the first element from the referenced array on which the selection function returns true, returning it. As with ["extract\_by"](#extract_by), this function requires a real array and not just a list, and is also implemented using `splice` so that weak references are not disturbed. If this function fails to find a matching element, it will return an empty list in list context. This allows a caller to distinguish the case between no matching element, and the first matching element being `undef`. ## weighted\_shuffle\_by @vals = weighted_shuffle_by { WEIGHTFUNC } @vals Returns the list of values shuffled into a random order. The randomisation is not uniform, but weighted by the value returned by the `WEIGHTFUNC`. The probability of each item being returned first will be distributed with the distribution of the weights, and so on recursively for the remaining items. ## bundle\_by @vals = bundle_by { BLOCKFUNC } $number, @vals Similar to a regular `map` functional, returns a list of the values returned by `BLOCKFUNC`. Values from the input list are given to the block function in bundles of `$number`. If given a list of values whose length does not evenly divide by `$number`, the final call will be passed fewer elements than the others. # EXPORTS This module exports nothing by default. You can import functions by name, or get everything with the `:all` tag. # SEE ALSO [List::Util](https://metacpan.org/pod/List::Util), [List::SomeUtils](https://metacpan.org/pod/List::SomeUtils) and [List::UtilsBy](https://metacpan.org/pod/List::UtilsBy), obviously. Also see `Util::Any`, which unifies many more util modules, and also lets you rename functions as part of the import. # BUGS Please report any bugs or feature requests to `bug-list-allutils@rt.cpan.org`, or through the web interface at [http://rt.cpan.org](http://rt.cpan.org). I will be notified, and then you'll automatically be notified of progress on your bug as I make changes. Bugs may be submitted at [http://rt.cpan.org/Public/Dist/Display.html?Name=List-AllUtils](http://rt.cpan.org/Public/Dist/Display.html?Name=List-AllUtils) or via email to [bug-list-allutils@rt.cpan.org](mailto:bug-list-allutils@rt.cpan.org). I am also usually active on IRC as 'autarch' on `irc://irc.perl.org`. # SOURCE The source code repository for List-AllUtils can be found at [https://github.com/houseabsolute/List-AllUtils](https://github.com/houseabsolute/List-AllUtils). # DONATIONS If you'd like to thank me for the work I've done on this module, please consider making a "donation" to me via PayPal. I spend a lot of free time creating free software, and would appreciate any support you'd care to offer. Please note that **I am not suggesting that you must do this** in order for me to continue working on this particular software. I will continue to do so, inasmuch as I have in the past, for as long as it interests me. Similarly, a donation made in this way will probably not make me work on this software much more, unless I get so many donations that I can consider working on free software full time (let's all have a chuckle at that together). To donate, log into PayPal and send money to autarch@urth.org, or use the button at [http://www.urth.org/~autarch/fs-donation.html](http://www.urth.org/~autarch/fs-donation.html). # AUTHOR Dave Rolsky <autarch@urth.org> # CONTRIBUTORS - Karen Etheridge <ether@cpan.org> - Ricardo Signes <rjbs@cpan.org> - Yanick Champoux <yanick@babyl.dyndns.org> # COPYRIGHT AND LICENSE This software is Copyright (c) 2018 by Dave Rolsky. This is free software, licensed under: The Artistic License 2.0 (GPL Compatible) The full text of the license can be found in the `LICENSE` file included with this distribution.